Masimo Radical Signal Extraction Manuel de l'opérateur télécharger pdf (Page 52)

42 Radical Signal Extraction Pulse Oximeter Operator’s Manual

home mode operation

The Radical can be placed into the Home Mode to protect unqualified users from changing

the Radical alarm settings and operation. Entering a password does not automatically reset

the Radical to the Normal operating mode. In the Home Mode, a password is required to

access the menu system and the touch key control buttons and icons.

NOTE: When the Radical is set to operate in the Home mode the default values that the

Radical reverts to after a power cycle are set according to Section 3, Monitor Setup, with

the exception of the Alarm Silence setting, which is set to the pre-power down setting.

password operation

The Radical password is 2-3-1. To enter the password use the touch-key control buttons to

the right or bottom of the LCD display and press the buttons in the sequence shown in the

following figure:

To return to normal operating mode set the General/Home Use parameters to

“

”

operation

First press

➙

✘

Then press

➙

Finally press

➙

✘ ✘

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

Pas de commentaire

Masimo Radical Signal Extraction Manuel de l'opérateur Page 52